<strike id="lzjpz"><b id="lzjpz"><font id="lzjpz"></font></b></strike><em id="lzjpz"></em>
<address id="lzjpz"><nobr id="lzjpz"><progress id="lzjpz"></progress></nobr></address>
<noframes id="lzjpz">

<form id="lzjpz"></form><em id="lzjpz"><span id="lzjpz"><pre id="lzjpz"></pre></span></em>

<span id="lzjpz"></span>
 
  • 聯系人:鄧先生18929104529
  • 張小姐:18929104530
  • 周小姐:18929169595
  • 電 話:0769-21664818
  • 傳 真:0769-21664685
  • 郵 箱:ybl_kj@163.com
  • 網 址:www.cnshuangchao.com
  • 大陸總部地址:廣東省東莞市萬江區大汾工業區沙滘坊十六巷31號

 

原理

您的位置:首頁 > 原理

產品原理介紹

  氣液增壓系列產品是以空氣壓縮氣體作為動力源,利用帕斯卡能源守衡定律作轉換,實現壓力提高到幾十倍的高壓出力產品。本系列產品是在壓縮氣體壓力不變的情況下,改變受力面積,從而實現壓強變大,再次從壓強不變的情況下,改變受力面積,實現壓力提高到幾十倍的一種節能產品。
Gas-liquid booster series products is the air compressed gas as power source, using the Pascal energy conservation law for the conversion, high pressure increased to several times the output products. This series of products is in the compressed gas pressure under the condition of invariable, changing the force area, so as to realize the pressure becomes larger, unchanged from the pressure again situation, change the force area, realize the pressure increased to an energy-saving products several times.

 

以下是標準式增壓缸動作示意圖:

The following diagram action standard booster cylinder:

 

A、C氣口通氣,B、D氣口排氣,此時缸處于原點狀態;
A,C port,B,D port and exhaust ventilation,when the cylinder is in state of origin;


B、C氣口通氣,A、D氣口排氣,此時缸處于預壓出力狀態;
B,C A,D air ventilation,air exhaust,the cylinder in the preloading force state;


B、D氣口通氣,A、C氣口排氣,此時缸處于高壓出力(增壓出力)狀態;
B,D A,C air ventilation,air exhaust,the cylinder in a high pressure output (boost output) state;


A、C氣口進氣,B、D氣口排氣,此時缸處于回位狀態。
A,C port,D port B intake,exhaust,the cylinder in the return status.


動作程序:Action program:
1、DT1、DT2電磁閥斷電,A、C氣口通氣B、D氣口排氣,增壓缸回到原點如下圖1;
DT1, DT2 solenoid valve power, A, C B, D air ventilation air exhaust, a pressurizing cylinder back in figure 1;
2、DT1通電,DT2斷電,C氣口通氣A、D氣口排氣、壓縮空氣將油壓到油缸內推動活塞桿前移,實現預壓出力狀態如下圖2;
The power DT1, DT2 power, C port A, D port and exhaust ventilation, compressed air to push the piston rod oil cylinder forward, realize the preloading force state in figure 2;
3、DT1、DT2通電,B、D氣口通氣A、C氣口排氣,壓縮空氣推動活塞前移,油缸內產生高壓推動活塞桿前移,生產高壓出力(增壓出力)如下圖3;
DT1, B, D power DT2, A, C outlet exhaust air ventilation, the compressed air to push the piston to move forward, to generate high pressure to push the piston rod forward cylinder, production of high-voltage output (boost output) in figure 3;
4、DT1、DT2斷電,根據工件保壓需求DT1、DT2斷電,A、C氣口進氣,B、D氣口排氣增壓缸回到原點,此時一個動作循環完成如下圖4;
DT1, DT2 power, according to the workpiece holding demand DT1, DT2 power, A, C port, D port B intake, exhaust pressure cylinder back to the origin, the cycle of an action completed in figure 4;

產品快速導航

粵ICP備12048194號 Copyright©2013版權所有 東莞市亞布力氣動液壓設備科技有限公司 大陸總部地址:廣東省東莞市萬江區大汾工業區沙滘坊十六巷31號

本站關鍵字:增壓缸,壓力機,生產線,倍力氣缸,增力缸,氣液增壓缸,氣液增壓器,增壓氣缸,氣液增力缸,風油增壓缸,氣體增壓器,氣體增壓閥,氣體增壓泵,氧氣增壓泵,氣壓壓床,增壓沖床,四柱型增壓沖床,半弓型增壓沖床,增壓壓力機,臺式沖壓機,C型落地式沖壓機,無鉚釘連接設備,增壓缸鉚接設備,汽車離合器自動組裝壓鉚設備,電子電器生產線,CD播放機自動生產線,電腦自動裝配生產線,太陽能集熱板自動組裝生產線,精細零件自動生產設備,母線槽自動組裝壓鉚設備,插頭全自動組裝機,開關自動組裝機,壓裝機、壓鉚機,全自動壓鉚機,全自動螺母壓裝機
電話:0769-21664818 傳真:0769-21664685 手機:18929104530 技術支持:杭州四喜

小草在线观看在线播放 - 视频 - 在线观看 - 影视资讯 -酷酷网